JRH 93 5 inch 38 open gun mount 1/96: Construction Guide

Construction Guide:

This is JRH 93 the USN 5″/38 gun assembly guide.

1. All the parts in the kit.
 
2. Fit the base ring to the base and drill out all the holes indicated for the control and fuse setting parts with a 1.4mm drill, but not the central trunnion fixing holes.

JRH 81 searchlight: Construction Guide

This is a scale 1/96 part.

Construction guide:

a) the complete kit
b) fix the right-hand bracket where shown
c) fix the searchlight bowl in the RH bracket hole and in the LH bracket open slot
d) drill and fix the handwheel where shown and after inserting a clear disc [ not supplied ] fix the dome shaped  rear piece
e) the complete assembly

JRH 702 Aircraft Crane base kit: Construction Guide

This is a scale 1/96 part.

Construction advice:

a) Showing the 9 parts in the kit.
b) Fit the circular base into the baseframe keeping the circular base bottom ring rear-facing.
c) Continue reading →

JRH 632 Twin Bofor kit + PE. Fret: Construction Guide

A 1/96 scale kit

1)  Complete list of kit parts

2)  Drill out rear platform 0.7mm drill and fit backframe [ use cyano glue ] look carefully to see where Continue reading →

JRH 625 Single bofor 1/96: Construction Guide

Construction guide:

1: There are 6 parts in the kit.
2: Drill the baseframe 0.5mm drill to take seats and trunnion wire handles.
3: Clean off the two front pads and rear pad Continue reading →